Designed in Denmark
Suprabeam’s pioneer design is made in Denmark. This is the only way to ensure that our innovation is cutting edge, and that every element is carefully designed by our engineers to meet our high standards. It is not the fastest way to make a flashlight or headlamp, but it is the only acceptable way for the Suprabeam brand. Our Premium technology is developed with the latest electronics and components available. We never compromise, and only select the greatest Power LED’s from the world’s premium LED manufactures, who can meet our high expectations. This is why we have our own factory in China to assemble all products and mount our special designed heat-sink providing Thermal Management which allows us to get a constant:
- maximum output
- high efficiency thermal management
- low power consumption
- long life operation
TESTED FOR RELIABILITY
As part of the Suprabeam brand, each product is tested both on our factory and in Denmark throughout a series of trails. Only after a full report has been conducted and approved, they can be allowed to leave the Suprabeam headquarters.
Genuine light experience
Real light – Real life. Without compromise
When Suprabeam state “Real life – Real light” it is because, that is what Suprabeam products are all about. These are light tools created to deliver the best possible light experience for what you really need in real life. We constantly work on our electronic control between battery and LED to get the best possible light output for the whole duration of the battery lifetime.
For users of our torches and headlamps it means that if you choose to put your torch or headlamp in boost mode the electronics will make the highest possible light output until the battery is completely drained. This electronic control we call Constant Current Output, because the electronics drags a constant current out of the batteries, constantly bumping up the power output.
Most torch producers choose to have a high boost and then let the electronics drop the light output way down to give the illusion of a long battery life time with a high output. In the video, you can see an example of a Suprabeam headlamp and a “typical headlamp”.
Built for heavy duty
Switch, LED Heat-sink & Modular built
Switch designed for heavy duty
The switch is the most common thing to fail on torches. That’s why we choose a high quality switch, which is tested to run for at least 20.000 operations. The switch is covered with a durable solid silicone or aluminium button. Combined we created the greatest and most durable solution ever seen in a torch.
Even if you unlikely should encounter problems, it is designed to be easily replaced like any other part of our torch.
Our Power LED’s are mounted with “heat-sink”. This insures a perfect user experience every single time you use it. The special designed Heat-sink takes advantage of the entire device by diverting the heat throughout the core structure. You will therefore be able to get maximum output for a much longer period.
- Maximum output
- Efficient thermal management
- Low power consumption
- Long-life operation
All Suprabeam lamps are modular built, in order to provide an easier way to change a part, if something accidentally breaks. This benefits the users of Suprabeam products, because you do not have to throw your lamp away if you have an accident, you can just replace the broken part and continue to use your product.
The V3pro headlamps from Suprabeam are equipped with a unique plug system, that provides flexibility and increases product lifetime
Hyperfocus™ is found on all V3 headlamps from Suprabeam. It allows you to adjust the light beam of your headlamp from flood to spot by sliding the lamp head forward or backward. The focus system is very efficient because of the reflector and optics.
The lamp head on all Suprabeam headlamps can be adjusted up and down to the preferred angle. When the lamp head is placed in start position the light beam will point upwards when the headlamp is placed on you head. This is useful when climbing or other activities with an upwards orientation. Adjusting the lamp head to position 2-6 downwards is perfect for running, hiking or ground illumination.
Versatility and longer product lifetime
Headlamps normally come with a fixed wire in the lamp head, and in the battery pack, which means that if the wire is damaged, getting stuck on a branch or similar situations, there is no possibility to repair the headlamp. You would be forced to throw it out! With the unique Suprabeam plug system, the cable will fall out if it is stuck on a branch, but even if it breaks you will be able to just change the cable, instead of having to buy a new headlamp.
Make the right battery choice
Flexibility, Maximum power or cheapest running cost?
Do you use your torch or headlamp:
- 5 minutes or less, at the time
- 2-3 times a week or lees
Then a torch or headlamp with alkaline batteries is the best choice for you, because alkaline batteries are very good in devices that consumes power over a long period of time, and aren’t used for long durations of time. Alkaline batteries has the advantage of being easy accessible, which means that you can replace the drained batteries with fresh ones instantly.
If you use your torch og headlamp:
- 5-30 minutes or more at the time
- 2-3 times a week or more
If you use your headlamp or torch for long durations each time and regularly. A high quality rechargeable NiMh battery would fit you and your wallet very good. You will as a medium user soon realize that a high output torch or headlamp goes through alcaline batteries very quickly. A change to use high quality NiMh batteries will benefit the environment, your wallet, and you will get a bit more power out of your torch or headlamp.
Do you use your torch or headlamp as below, you are a heavy user:
- 30 minutes or more each time
- 3 times a week or more, or for long durations
If you use your torch or headlamp as a part of your everyday life, a rechargeable Li-ion / Polymer is the right choice for you. Li-ion / Polymer batteries can pack more power than normal batteries, and can run a high output torch with a stable constant output, for long periods of time. The only thing to remember when buying a Li-ion / Polymer torch or headlamp, is to have the right amount of spare batteries needed for your intended use.
Safe use around rechargeable batteries
Proper usage and safe handling guidelines
Download the PDF about Proper and safe handling of lithium batteries
- Do not leave batteries where the temperature may become high, Doing so may result in overheating, explosion or fire.
- Do not disassemble, puncture, or damage the battery in any way.
- Do not apply strong impacts to the battery.
- Do not throw lithium-ion secondary batteries, drop them from high places, or otherwise subject them to strong impacts. Doing so may cause overheating, explosion or fire.
- Do not recharge batteries where heat can build up
- Do not place combustible materials on top of or over a lithium-ion secondary battery when recharging or discharging. Doing so may result in overheating, explosion or fire.
For more information about safe handling of rechargeable batteries, please download the