Many SUPRABEAM products have several light modes. Use the lowest light mode. This is very practical as this uses less power. Also, try to switch off completely when not required or periodically during use. This allows the battery to recover and prolongs its life.
These batteries should be recycled as they are considered to be hazardous waste. Typically you can recycle your batteries in most large supermarkets and at household waste recovery centres.
If you have a V3pro series headlamp, you will need to connect the cable to both the battery pack and the headlamp before attempting to turn it on. Please follow these instructions: The short end of the cable has to be connected to the battery pack. The long end of the cable has to be connected to the headlamp. Make sure that you keep the end of the cable straight when connecting it. The connection can be done in one single move, without shaking or forcing the cable. Pushing the cable in an inclined position or forcing it may damage the pins inside the headlamp or the battery pack. The cable has two small feet that will fix it [...]
Virtually every component of your SUPRABEAM product is available separately. Please contact your individual retailer for assistance.
To turn on your V-series headlamp, please follow the instructions below: 1. Click to turn on the headlamp in standard or the last used light level 2. Click and hold for 0,8 sec to change to the MAX light level. Do the same to switch back to the previous light level. 3. Click to turn off
The head can be easily rotated up to 90° to the front just by pulling it. The head will stay in the chosen angle.
