There can be several reasons to this, but before contacting the place of purchase please check that your M6xr does not have transportation lock activated. To deactivate transportation lock: Press and hold the button for +5 seconds If your M6xr begins blinking to indicate battery level, transportation lock has successfully been deactivated. If nothing happens, please contact the place of purchase.
It may just be that it has been turned off. To turn it on: Turn on the headlamp Press and hold the button for 3 seconds to turn it on and off.
Pay special attention to the polarity of the batteries when placing them in the batterypack. The polarity is always clearly marked in the batterypack.
There will always be a development of heat when using an LED flashlight or headlamp, as the LED emits heat as well as light. When running an LED hard to create a high lumens output, the heat buil-up will be equally high. Leading heat away from the LED chip itself is one of the finer arts when constructing high performing flashlights and headlamps.
There are several possible causes: Check the contacts You may need to clean them once in a while, or make sure that there is nothing obstructing them, such as the original protection tape. Check the batteries Make sure the batteries are properly placed. Follow the signs engraved in the battery pack, they show the correct position for the batteries. Check also that the tape has been removed. If you have a rechargeable battery, make sure it is charged. A contact is stuck For the rechargeable battery packs, it can occur that one of the pins gets stuck inside. You may need to push it in order for it to come back to its original position. Check the cable Make sure [...]
